Table of Contents
Advertisement
2 Using the radEAGLET-R
The radEAGLET-R is designed for single-hand operation. You hold the instrument by its han-
dle and point the the detector to the object to be surveyed while observing the screen and
pressing the keys with your thumb.
2.1 The radEAGLET-R Display
The radEAGLET-R displays information on a color LCD screen (Fig. 1, p. 17) divided into three
principle areas (Fig. 7, p. 23).
Status Information
Main Display Area
Current Key Commands
Top: Status Bar
This area contains icons representing the status of several components of the
radEAGLET-R.
5:56 pm
The hours and minutes of the current local time are shown. The date and time
are read from the internal clock of the radEAGLET-R. Time stamps are written
into all files saved by the radEAGLET-R, for example, spectra.
Please ensure the correct setting of the clock and your local time zone
(see 5.3, p. 55)
If the instrument's clock is completely off, you have to set it via the web
interface (see 7.6, p. 113).
© innoRIID GmbH • 2020-11-18
Figure 7:
Anatomy of the radEAGLET-R display
Software 3.2.12r • Document 3.3.3b4o
Current Time
Battery Status
Communication Status
GPS Status
Stabilization Status
Data Logging Status
Spectrum Acquisition Status
23/163
Advertisement
Table of Contents
