Connect To A Known Bluetooth Device; Web Interface Address For Devices Connected Via Bluetooth - Ametek Ortec radEAGLET-R Series User Manual

Table of Contents

radEAGLET-R User Manual

Follow the instructions displayed to initiate the pairing. The paired device will be shown

(Fig. 56, p. 65) and is ready for connection.

The radEAGLET-R remembers all devices it has been paired to. If your desired device

is already known, just choose it from the list.

After the connection is established, the IP address to access the Web interface is shown

(Fig. 57, p. 65) as text and as QR code for devices equipped appropriately.

Figure 57:

Figure 56:

Connect to a known Bluetooth device

Software 3.2.12r • Document 3.3.3b4o

radEAGLET-R Advanced Menu

Bluetooth Status

65/163

Table of Contents