Send Data; Checking The Internet Connection - Ametek Ortec radEAGLET-R Series User Manual

5.26 Send Data

All measurements are stored in the radEAGLET-R's database and can be ac-
cessed via the usual methods, for example, the Web interface (see 7.10, p. 118)
or sent by mail (see 5.26, p. 88).
Settings and Commands
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Change
Edit the highlighted setting.
Exit
Return to the superior screen.
5.26 Send Data
You can sent saved spectra (see 5.1, p. 51) or reachback data sets (see 5.25, p. 86) via
e-mail with this command.
Sending mail is possible only while your radEAGLET-R is connected to the Internet, so this is
checked first, Fig. 90, p. 88.
If there is no connection you are routed to the appropriate settings screens to configure a
connection, Fig. 91, p.
88/163
Figure 90:

Checking the Internet connection

89 (see 5.7, p. 59).
Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
© innoRIID GmbH • 2020-11-18