Removing An Adaptor From The Wall Power Supply; Mounting An Adaptor To The Wall Power Supply - Ametek Ortec radEAGLET-R Series User Manual

radEAGLET-R User Manual
To swap the international adaptor...
1. Press the lock and slide the current adaptor to the side out of its socket (Fig. 132,
p. 125).
Figure 132:
2. Insert the desired adaptor into the socket and move it until it snaps into place
(Fig. 133, p. 125).
Push Down and Slide
Figure 133:
© innoRIID GmbH • 2020-11-18

Removing an adaptor from the wall power supply

Mounting an adaptor to the wall power supply

Software 3.2.12r • Document 3.3.3b4o
Powering the radEAGLET-R
2. Pull and Slide
1. Pull Down
125/163