Set Password; Factory Settings; Setting The Password - Ametek Ortec radEAGLET-R Series User Manual

radEAGLET-R User Manual

5.23 Set Password

You can (and should) change the password of your radEAGLET-R to prevent unauthorized
changes of protected settings.
After you confirmed that you want to set a new password (Fig. 85, p. 85) just enter the new
password as described in 2.2.4, p. 28.
Make sure to remember your changed password. Passwords cannot be deciphered
at the factory.

5.24 Factory Settings

This command re-establishes the factory settings of your radEAGLET-R. You have to confirm
this command (Fig. 86, p. 86).
Reset
Discard all your changes to the settings of the radEAGLET-R and re-establish the fac-
tory settings.
This includes the password for the protected settings (see 2.2.4, p. 28).
Exit
Return to the superior screen.
© innoRIID GmbH • 2020-11-18
Figure 85:

Setting the password

Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R Advanced Menu
85/163