Wall Power Supply With International Adaptors - Ametek Ortec radEAGLET-R Series User Manual

8.3 External Power Sources
While the radEAGLET-R is powered by an external source providing enough power to
charge the internal battery, the the battery symbol (Fig. 1, p. 17) is decorated by a
bolt.
To connect an external power source...
1. Remove the protective cap from the connector.
2. Insert the plug
Observe the orientation mark. The red marker on the plug must face upwards.
Always grab the plug when handling the connection.Do not pull at the cable behind the
plug.
8.3.1 Wall Power Supply
Every power supply shipped with the radEAGLET-R can handle common international AC
voltages and frequencies.
Some models come with a fixed plug for a certain country. You can use a common traveler's
kit to mechanically adapt the plug to various international wall outlets.
Other models feature swappable adaptors for several international wall outlet standards
(Fig. 131, p. 124).
Wall Power Supply
Adaptor Socket
Locking Pin
Australia
Figure 131:
124/163

Wall power supply with international adaptors

Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
Europe
U. S. A.
United Kingdom
© innoRIID GmbH • 2020-11-18