Table of Contents
Advertisement
radEAGLET-R User Manual
If your model is not equipped with an internal source, place a suitable calibration
40
source (
K or
Current Dose Rate
Raw Spectrum
Nuclide for Calibration
Measured Peak Position
Theoretical Peak Position
Current Dose Rate
Raw Spectrum
Nuclide for Calibration
Measured Peak Position
Theoretical Peak Position
Settings and Commands
Next
Reveal the next available command for the left key.
Source
Specify the source to be used for calibration. Available are
© innoRIID GmbH • 2020-11-18
137
Cs) in front of the detector before proceeding.
Figure 73:
The calibration screen
Figure 74:
The calibration screen after measurement
Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R Advanced Menu
Current Count Rate
Current Peak Fit
Measurement Progress
Current Count Rate
Peak Fit
Resolution After Calibration
Measurement Finished
40
137
K and
Cs.
77/163
Advertisement
Table of Contents
