Table of Contents
Advertisement
3 radEAGLET-R Measuring Modes
This chapter describes the essential measuring modes of your radEAGLET-R.
Dose Rate Mode
Observe the ambient radiation, see 3.1, p.
Easy ID Mode
Identify radiating nuclides quickly, see 3.2, p.
Detect Mode
Locate radiation sources, see 3.3, p.
Measuring modes might be overridden by warning and alarms, please refer to chapter 4,
p. 43.
3.1 Dose Rate Mode
The Dose Rate Mode is the main measurement mode of the radEAGLET-R. It is active after
starting up the instrument.
Dose Rate Unit
Current Dose Rate Value
Circular Dose Rate Axis
Several representations of the current ambient dose rate (H*10) are shown (Fig. 20, p. 35):
Digital
Large digits show the current value and the unit. The unit adapts to the order of
magnitude of the value: µSv/h, mSv/h, Sv/h. You can select a Sievert or a rem-based
display, see 5.4, p. 56.
Additionally, the current gamma count rate is shown.
© innoRIID GmbH • 2020-11-18
35
37
38
Figure 20:
Dose rate display
Software 3.2.12r • Document 3.3.3b4o
Warning Threshold
Warning Indicator
Alarm Threshold
Alarm Indicator
Neutron Data and Incident
Indicator
35/163
Advertisement
Table of Contents
