Collecting Reachback Data; Collected Measurements - Ametek Ortec radEAGLET-R Series User Manual

radEAGLET-R User Manual
4. Start the measurement. The elapsed time is shown during the measurement (Fig. 88,
p. 87).
5. The name of the finished measurement file is appended to the collection.
6. Add more measurements ad libitum (Fig. 89, p. 87).
7. Press Finish
All the listed measurements, both in *.spe and *.n42 format, will be combined into
a *.zip archive named after the date and time of the measurement.
You will be informed about the saved collection.
© innoRIID GmbH • 2020-11-18
Figure 88:

Collecting reachback data

Figure 89:

Collected measurements

to close the collection.
Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R Advanced Menu
87/163