Connecting The Electrical Power Supply - Ametek LAND MILLWATCH User Manual

Single Stream
5

Connecting the Electrical Power Supply

Where no case heater or antifreeze line are used, the power supply is connected
using the plug supplied with the instrument.
Where a case heater and/or antifreeze line are used, the power supply is connected
on the terminal rail.
L Live
N Neutral
Earth (Ground)
Check the fuse is installed correctly.
The arrow showing the correct voltage
should be aligned with the white bar.
A plug is provided with the instrument.
When an antifreeze line and/or case heater is fitted the power supply must be
connected on the terminal rail.
User Guide
Brown
Blue
Green/yellow
Millwatch / Silowatch
On/Off
5