Table of Contents
Advertisement
Operation
3
2
1
Illust. 8: Setting temperatures for automatic mode
(1) Offset
In the event of unfavourable spatial
conditions, the temperatures
measured on the thermostat may
deviate from the overall room tem-
perature.
The offset setting serves to bal-
ance out this discrepancy.
The offset can be set between -5
and +5.
(2) Economy
The economy temperature is the
temperature that should apply
tempera-
during the periods when you would
ture
like to lower the temperature.
(3) Comfort
The comfort temperature is the
temperature that you personally
tempera-
find most comfortable. You can
ture
set when this temperature should
apply in your heating profiles (see
Section 8.2.4 on page 12).
f Tap on the corresponding temperature type.
f Set the required temperature using the mode dial,
or adjust the offset using the arrow keys next to the
value.
Z The chosen settings are automatically adopted.
12
8.2.4
"Heating profile" menu (item 8 in Illust. 6
on page 11)
This page allows you to select the time periods in
which the comfort temperature should be active
within the relevant room.
Four periods can be defined in which the com-
fort temperature should apply.
Economy temperature will be applied for the
rest of the time.
f Set the time periods in which the comfort tempera-
ture should apply within the relevant room.
f Transfer your settings to the "mote 200" by tapping
on the "Transfer heating times and exit" button.
8.2.5
"Hde" menu (item 7 in Illust. 6)
Settings for the holiday profile.
8.2.6
"Setting" menu (item 6 in Illust. 6)
Illust. 9: "Setting"
(1)
Sensitivity of the open-window recognition.
(2)
Time frame during which the valve remains
closed once an open window has been detect-
ed.
(3)
Activate key lock/child-proof lock. This locks
manual operation of the controller.
„mote 200"
1
2
3
115096180#EN-V04.01.2020
Hide quick links:
Advertisement
Table of Contents
