Technical Data "I-Tronic Tfc; Note Regarding Declaration Of Conformity; General Conditions Of Sales And Delivery - oventrop i-Tronic TFC Installation And Operating Instructions Manual

Product description
2.2

Technical data "i-Tronic TFC"

Power Supply:
Display:
Measuring range T (°C): +0°C up to +50°C
Accuracy at +25°C:
Measuring range RH (%): 0 up to 100% RH ("relative humidity")
Accuracy at +25°C
and 20-80 % RH:
Measuring range CO
Accuracy at +25°C
and 1.013 mbar:
Temperature dependence: typ. 2 PPM CO
Long-term stability:
Operation mode
Protection:
Protective system:
Ambient temperature:
Casing:
Dimensions of casing:
Subject to technical modifi cations!
Type plate
2.3

Note regarding declaration of conformity

The company OVENTROP GmbH & Co. KG hereby declares that the "i-Tronic
TFC" device complies with the basic requirements and other relevant provi-
sions of the guidelines 2014/35/EC (low voltage guideline) and 2014/30/EC
(electromagnetic compatibility).
The declaration of conformity can be obtained from the manufacturer.
2.4

General conditions of sales and delivery

Oventrops general conditions of sales and delivery valid at the time of supply
are applicable.
18
power pack/mains adaptor (100-240V / 50-60Hz)
or with charging electronics (rechargeable batteries)
LC-Display
± 1 K
± 4,5% RH
(ppm): 0 up to 2.000 PPM
2
< ± 50 PPM +2% of measured value
typ. 20 PPM/a
Type 1 (EN 60730-1)
IP20 (EN 60529)
III - Protective low voltage
+5°C up to +50°C
ABS (ASA), traffi c white similar to RAL 9016
85 x 85 x 35 mm (W x H x D)
/°C (0...50 PPM)
2
„i-Tronic TFC"