Count Time - Troxler Enhanced RoadReader Plus 3451 Manual Of Operation And Instruction

Figure 5–5. Mode Change Display

COUNT TIME

The count time defines how long the gauge reads. Longer count
times produce better measurement precision. Troxler recommends a
count time of one minute for most sample measurements.
To change the count time, press the 〈Time〉 button on the Gauge
Setup menu (see page 5–2). The PDA displays the Count Time
Menu shown in Figure 5–6. The current count time is displayed at
the top of the menu.
To select the desired count time, press the corresponding button.
The PDA sets the count time and displays a confirmation message.
Press the 〈ok〉 button to return to the Count Time Menu.
Press the 〈Done〉 button to return to the Gauge Setup menu
5–6