Troxler Enhanced RoadReader Plus 3451 Manual Of Operation And Instruction page 121

Figure 6–17. Special
File Selector
 Press 〈OK〉 to erase the special calibration file. The PDA
displays Special calibration XXX has been erased. Press
〈ok〉 to continue.
 If the erased project was not previously active, the PDA
returns to the Special Calibration Menu.
 If the erased project was previously active, the PDA
displays The special calibration named XXX at index
rod position X has been erased. Press 〈ok〉 to return
to the Special Calibration Menu.
 Press 〈Cancel〉 to exit without erasing the special calibration
file. The PDA displays The special calibration named
XXX will not be erased! Press 〈ok〉 to return to the Special
Calibration Menu.
6–
Figure 6–18. Special
Calibration Erase Prompt