Troxler Enhanced RoadReader Plus 3451 Manual Of Operation And Instruction page 83

Figure 4–12. Individual Count Figure 4–13. Averaged Count
Results, Thin Layer Mode
✓ Reposition the gauge as prompted by the PDA and repeat the
above procedure at each position.
✓ After the final count is completed, the gauge collects the count
information and GPS data, and then transmits this data to the
PDA.
✓ The PDA displays the averaged measurement results as shown
in Figure 4–13. Press the 〈ok〉 button to continue.
If the gauge is unable to obtain GPS data after taking a
count, it will still send the count results to the PDA and
the results will be stored in the active project.
4–20
Results, Thin Layer Mode
NOTE