Enable A Target Value; Disable The Target Value - Troxler Enhanced RoadReader Plus 3451 Manual Of Operation And Instruction

ENABLE A TARGET VALUE

To enable a target value stored in memory, press the 〈Enable〉
button on the Target Menu (see Figure 5–15). The PDA displays
the target value selector menu, as shown in Figure 5–17. To enable
a target value, press the file name twice. The PDA displays a
confirmation message. Press the 〈ok〉 button to return to the
Proctor Value Menu.

DISABLE THE TARGET VALUE

To disable the target value, press the 〈Disable〉 button on the
Proctor Value Menu (see Figure 5–15). The PDA requests
confirmation that the target value is to be disabled. Press the 〈No〉
button to return to the Proctor Value Menu without disabling the
target value.
Press the 〈Yes〉 button to disable the target value. The PDA disables
the target value and displays a confirmation message. Press the 〈ok〉
button to return to the Proctor Value Menu.
The 3451 gauge can be used with the target value
disabled. In this case, however, no percent compaction
value will be displayed.
5–18
NOTE