3.5.2 Ventilator switch-ON / " SELF TEST " phase
•
Set the main switch (placed ON the back of the lung ventilator) to "I".
•
Make sure that on the lung ventilator keyboard
(commands area) the green led (that indicates
the presence of mains power supply) is on.
•
Hold the ON-OFF key for few seconds to start the
lung ventilator.
Siaretron4000e
" SELF TEST " phase. Close the patient circuit.
During " SELF TEST " phase, the lung ventilator software carries out
the self-diagnostic tests and checks a series of devices necessary for
safe lung ventilator operation.
The lung ventilator turns ON and
the automatic " SELF TEST "
phase begins.
•
The system checks the driven
provided (medical gases or
turbine).
•
The system checks the
Oxygen and Air input pressure
presence.
3-25