4.9
Ventilation phase
•
Press START soft key to begin the ventilation in the
selected mode with the most suitable PRP for the clinical
situation of the patient.
•
To returns in STAND-BY mode, please see 4.9.1.
•
In the upper section of the display you can find some values that will help you asses
the patient's clinical condition.
•
In the main section you can see the curves that show the trend of the respiratory
parameters.
•
On the right side of the screen there is a suitable lung icon that simulates the
patient's lungs, graphically displaying the respiratory cycle by alternatively switching
the lungs color.
Siaretron4000e
Before starting the ventilation you have to:
•
carry out all lung ventilator hardware connections (medical gases,
power supply, patient circuit, ........)
•
carry out the preliminary checks (please see chapter 3.7)
•
set the language and the patient data
•
set and check the alarms limits
•
set the Physiological Respiratory Parameters and the operating mode
that match the patient's clinical situation best
Based on the PRP set by the clinician according to the patient's
characteristics, the lung ventilator is able to display and measure a series
of values necessary for the patient's clinical evaluation.
4-43