4.2.2 Keyboard with soft key and encoder knob use
4-6
TESTS ON DEMAND
By means of this function it is possible to:
•
calibrate the Flow Sensors
•
calibrate the O
Sensor
2
•
perform the Leak Test
•
perform the "Zeroing of gas sensor" (optional accessory)
STAND-BY operative mode
•
After carrying out the SELF TEST or before turning the lung ventilator
off, it automatically switches to this operating mode.
•
In this operating mode you can set and/or edit all lung ventilator
parameters (SETUP, ALARMS, etc...) relative to the operating mode
that you will use on the patient that you want to treat.
In STAND-BY (SET function) you can select the operating mode and set
and/or edit all lung ventilator parameters (PRP) that belong to the operating
mode in question.
The PRP can also be adjusted while the lung ventilator runs, adapting them
to the patient's clinical situation.
For the keyboard with soft key and encoder knob methodology of use,
please see chapter 2.4.
User manual, DU3065104