5.3.3 Setting of DEFAULT values
Siaretron4000e
The DEFAULT PARAMETER allows setting the standard factory
parameters.
•
Press the encoder knob, the SET function is activated
•
Turn the encoder knob, select "MENU" , press the knob to
confirm.
To enter the standard factory parameters press the encoder knob.
In order not to modify the stored parameters press the ESC soft key and
return to MAIN MENU visualization.
•
The "MAIN MENU" page is
displayed.
•
Turn clockwise the encoder
knob to select the DEFAULT
PARAMETERS function.
•
Press the encoder to access to
the DEFAULT PARAMETERS
function.
5-13