Operating Modes And Prp Parameters; Operating Mode And Prp Parameters Editing Procedure - Siare Siaretron 4000 User Manual

4.8

Operating modes and PRP parameters

4.8.1 Operating mode and PRP parameters editing procedure

•
Lung ventilator in STAND-BY mode
4-16
In the following chapter you will find a description of available physiological
respiratory parameters (referred to from now on as PRP) and the operating
modes selectable on Siaretron 4000 lung ventilator.
WARNING !! Patient injury hazard
Thoroughly read this chapter and the entire manual to make sure you set
the PRP correctly and choose the most suitable ventilation mode.
The clinician must choose the operating modes that match the patient's
physiological features and pathologies best.
When the lung ventilator is turned on, the system restores the operative
mode and the relevant parameter values set before the last shut-down.
Just for our examples we refer to the Operative Modes available with
ADULT patient type
The procedure for setting a new operating mode or for editing the PRP
values, implies using the encoder knob and the control keyboard as
described on cfr. 2.4.
To exit SET screen.
•
Press the ESC soft key
•
Wait for the system to return to STAND-BY mode automatically.
•
Press the encoder knob; the
system will activate the SET
function (changes colour).
•
Press the encoder knob; the
system will activate the SET
function (changes colour).
•
The system will display all
PRP relative to the set
operating mode (VC/VAC).
User manual, DU3065104