Chapter 11 Testing with SmartIDs
About the SmartID tests
About the SmartID tests
The purpose of the SmartID tests are to test and map cables/wires, verify
that the HPNA links and devices are installed and fully provisioned, and to
verify that the entire HPNA network is operating correctly
To access the wiring tools
•
From the main menu, select Smart ID.
Locating SmartIDs
The purpose of this test is to identify up to 16 the SmartIDs
the network. The SmartIDs will work through splitters, and multiple Smar-
tIDs can be detected simultaneously.
Figure 11
Page 136
SmartID
OneExpert DSL User's Guide
22052280, Rev 006
(Figure
11) on
November 2015