Measuring Resistance And Leakage - Viavi OneExpert DSL User Manual

Chapter 12 Copper Testing

Measuring resistance and leakage

7 To switch between continuous and snapshot mode, use the left
system key Snapshot or Continuous.
8 To save the results to a report, use the Tray menu
on page
9 To learn what your results mean, see
in Chapter 14 "Test
Measuring voltage is complete.

Measuring resistance and leakage

Using the Multimeter, you can measure resistance to identify shorts,
grounds, and resistive faults.
To measure resistance and leakage
1 Connect the Tip (A), Ring (B), and Ground (Earth) leads to the line
under test.
2 From the Copper menu, touch the Multimeter button.
3 Touch the
The Resistance screen appears.
Page 152
49).
Results".
Omega tab.
Ω
OneExpert DSL User's Guide
22052280, Rev 006
("Saving a report"
"AC voltage" and "DC voltage"
November 2015