Table of Contents
Advertisement
Chapter 14 Test Results
WiFi Advisor results
Utilization graph
The utilization graph shows the channel utilization for all channels in the
selected band which could indicate co-channel or adjacent channel inter-
ference. This allows you to select the best channels available in the current
environment.
If the channel view shows utilization in the wrong channels, the likely issue
is that a high energy 802.11 transmitter is very close to the OneExpert DSL.
For example, a high energy 802.11ac transmitter is using channels 149,
153, 157, and 161. The channel view should show utilization in these chan-
nels only. Move the WiFi Advisor away from the high energy transmitter and
test again.
Noise graph
The noise graph displays the noise per channel.
Channel Score
The channel score provides a score per channel which determines the best
channels.
Best Channels
A table that identifies the current top 3 best channels based on channel
width for the band being viewed.
select for a new access point.
Page 218
helps determine which channel to
This
OneExpert DSL User's Guide
22052280, Rev 006
November 2015
Advertisement
Table of Contents
Troubleshooting
