Viewing The Device Interface On The Pc - Viavi OneExpert DSL User Manual

Chapter 3 Utilities
Specifying system settings
2 From the System Settings menu, select Remote Operation, and
then do the following:
a
b
c
3 Configure the Network Profile settings to match your LAN settings.
a
b
The Ethernet connection is established.

Viewing the device interface on the PC

After you have established an Ethernet connection, you must launch the
VNC program to view the device interface.
To view the device interface on the PC
1 Launch the VNC viewer on the PC.
2 In the viewer's server address field, type the OneExpert DSL's IP
address, and then select OK.
A password entry box appears.
3 Enter the VNC password (found on the Remote Operation menu) and
then select OK.
The OneExpert DSL user interface appears in the VNC viewer.
Page 32
Check Enable VNC Server.
If you wish to specify a new password to access the
OneExpert DSL, touch VNC Password, click in the text box,
and then enter a new password.
If you wish to use the OneExpert DSL as a
touch the checkbox.
From the System Settings menu, select Network.
If you are connected to the network and the Network is active,
the profile settings appear in the box at the top of the menu.
If the settings don't match your LAN touch Edit Profile and then
modify the settings as needed.
OneExpert DSL User's Guide
22052280, Rev 006
HTTP file server,
November 2015