Call Information Results; Video Results - Viavi OneExpert DSL User Manual

Call Information results

Table 27 describes the Call Information results.
Table 28
Result
Call Duration
Far End Information
Audio Parameters

Video results

After the OneExpert DSL is setup and a data connection is established,
video streams become available for analysis.
In the upper area of the screen, the graphic indicates the network status
(up/down), the number of active streams, and the combined rate indicates
the total video bandwidth (current and max). The total video bandwidth
("Combined rate") peaks can be important in analyzing total bandwidth
available. The total bandwidth is found on the DSL Summary screen. The
difference in the two numbers is the bandwidth available for either Internet
data or Internet data and VoIP data.
November 2015
Call Info results
OneExpert DSL User's Guide
Definition
Length of time for the current call. If the call
duration continues beyond 59:59 (meaning,
is more than an hour), the display changes
from mm:ss to hh::mm (note the change
from : to :: ).
The IP address, Name, and Alias for the
incoming call.
Whether RTCP is being used for the Audio
path, the receive and transmit codec being
used, Codec Packetization Interval RX and
TX, whether silence suppression is enabled,
and the number of jitter buffer replays or
times the jitter buffer has dropped cells.
22052280, Rev 006
Chapter 14 Test Results
Video results
Page 199