Connecting To The Line - Viavi OneExpert DSL User Manual

Setting
Loss Poor Threshold
Jitter Good Threshold
Jitter Poor Threshold
Delay Good Threshold
Delay Poor Threshold
MOS Scale
The test settings are specified.

Connecting to the line

After specifying the test settings, you can connect to the line. The proce-
dure is different depending on the access interface.
• For Ethernet connections, connect as described in
line" on page
• For DSL connections, connect as described in
line" on page
November 2015
Description
Enter the Fail threshold, in milliseconds.
Enter the Pass threshold, in milliseconds.
Enter the Fail threshold, in milliseconds.
Enter the Pass threshold, in milliseconds.
Enter the Fail threshold, in milliseconds.
Select the scaling method. This selection affects
the scaling of the CQ-MOS and LQ-MOS results
(on the "Call Scores" result screen). This selec-
tion is only available if your unit is equipped with
the MOS option.
101.
62.
OneExpert DSL User's Guide
22052280, Rev 006
Chapter 5 Data Testing
VoIP Testing
"Connecting to the
"Connecting to the
Page 89