Connecting To The Line; Viewing Results - Viavi OneExpert DSL User Manual

Connecting to the line

After specifying the test settings, you can connect to the line.
To connect to the line
1 Connect one end of an Ethernet cable to the Ethernet jack on the
right side of the unit.
2 Connect the other end of the cable to an Ethernet jack.

Viewing results

After specifying test settings and connecting to the line, you can view
results.
To view results
1 Touch the Connection Details button. Do one of the following:
– Press the Cancel key to return to the Network menu, and then
select Network Status or LAN Stats.
– From the Network Setup menu, press the left arrow to move to
the LAN Results menu, and then the left arrow again to move to
the Network Status menu.
2 To save a test report, press the utility (i) key and then select Save
Report, and then specify the report settings such as report name,
report format, technician ID, location, and other settings as needed.
3 To clear the results, use the asterisk (*) key.
See Chapter 14 "Test Results"
November 2015
to learn what your results mean.
OneExpert DSL User's Guide
22052280, Rev 006
Chapter 6 Ethernet TE Testing

Connecting to the line

Page 101