Jenny Science XENAX Xvi 75V8S Instruction Manual page 54

The Force Calibration function compensates the
magnetic cogging forces, the load force and the
friction forces of the LINAX®/ELAX® iron-core linear
motors and rotary motor axes ROTAX® from Jenny
Refer to chapter 13 Force Process Forceteq®
Recording position, acceleration, IForce and
Recording starts, as soon as the drive has started. The
record lasts until the drive and a possible program
Recording starts, as soon as the drive has started. The
record lasts as long as the time indicated (2-8000ms).
Initialization for new recording sequence. Wait for
message "ready for recording next motion". Start
motion in command panel (move axis / by click or by
Science.
position deviation
LOGGING AUTO
have ended.
LOGGING TIME
record new
command line) e.g. G44000.
10.7 Move Axis by Forceteq®
10.8 Move Axis Motion Diagram
54