Functional Safety - Tüv Certified; Hardware Requirements; Safety Standards - Jenny Science XENAX Xvi 75V8S Instruction Manual

In order to use the TÜV certified safety functions a
XENAX® Servo controller equipped with an optional
Safety Motion Unit (SMU) is needed.
The SMU module has to be ordered by the client with
XENAX® Servo controllers can only be upgraded to
Upgrade is only possible with hardware V 4.0 or
SMU modules will only be supplied when mounted
into a XENAX® Servo controller.
In case of any modification or attempts of
modification on the hardware by third parties, the
TÜV certification is no longer guaranteed and Jenny
Functional safety of electrical/
electronic/programmable safety-related systems
Safety of machinery, Safety-related parts of control
Adjustable speed electrical power drive systems
a separate article number.
SMU at Jenny Science.
higher
Legal Note:
Science declines all liability.
EN 61508-1:2010
EN 61508-2:2010
EN 61508-3:2010
EN ISO 13849-1:2015
systems
EN 61800-5-2:2017
4 Functional Safety - TÜV certified

4.1 Hardware Requirements

4.2 Safety Standards

SIL 2 Safety Integrity Level 2
Cat 3 Category 3
PL d Performance Level d
Safety Functions:
STO Safe Torque Off
SS1 Safe Stop 1
SS2 Safe Stop 2
SLS Safely-Limited Speed
Functional Safety
SIL 2, PL d, Cat. 3
13