Jenny Science XENAX Xvi 75V8S Instruction Manual page 34

Start your web browser with the IP address number of
your XENAX® and add "/xenax.html" as a suffix.
IP address is provided on the back side of the XENAX®.
XENAX® is being started with an automatic system self-
check including type designation and version information
on firmware and hardware. Moreover, WebMotion®
identifies the connected linear motor or rotary motor and
uploads the current XENAX® settings (parameters,
Interruption of TCP/IP Connection
If the XENAX® logic supply is interrupted or if the Ethernet
cable is disconnected, the TCP/IP interruption will be
detected by WebMotion® and signaled with "offline". After
removing the cause of the offline-mode, the TCP/IP
connection has to be reloaded by updating the current
If it is still blocked, it is recommended to first exit and then
The settings in Kaspersky Internet Security might be
responsible if the error code „Error Upload XENAX
Settings" occurs with the automatic self-check of
If you are using Kaspersky or similar internet security
software, the security for Instant Messenger Services has
(Refer example in Kaspersky Pure 3.0)
Example:
http://192.168.2.xxx/xenax.html
programs) in to the WebMotion®.
web browser window.
restarts the web browser.
WebMotion®.
to be deactivated.
10.1 Start WebMotion
10.1.1 Error „Upload XENAX Settings®"
®
34