Electrical Connection - Siemens SINAMICS S120 Equipment Manual

Accessories
13.3 DC link adapter
13.3.6

Electrical connection

Required tools:
● Hexagon-socket spanner (size 6)
● Suitable tool for tube clips (e.g. flat-bladed screwdriver)
Table 13-16 Electrical connection of the DC link adapter for a 150 mm component
Route the cable through the tube clip and insert it into the
DC link adapter.
Secure the tube clip.
Only shielded connection cables should be used.
The DC link adapter can be fitted on the right or left.
288
Secure the cable.
The cable is connected.
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
Booksize cold-plate power units