Line Supply/Load Connection; Dimension Drawing - Siemens SINAMICS S120 Equipment Manual

Line connection
4.7 Basic Line Filter for Basic Line Modules
4.7.3.2

Line supply/load connection

Table 4-12 Connection type
Terminals
Line supply connection (line supply)
Load connection (load)
Basic Line Filter for Basic Line Modules
20 kW
40 kW
100 kW
1) for ring cable lugs to DIN 46234
4.7.4

Dimension drawing

Figure 4-17 Dimension drawing: Basic Line Filter for Basic Line Modules (20 kW and 40 kW)
Table 4-13 Dimensions of Basic Line Filter for Basic Line Modules
Basic Line Order number
Filters
20 kW 6SL3000-0BE21-6DAx
40 kW 6SL3000-0BE23-6DA1
64
Designations
L1, L2, L3, PE
L1´, L2´, L3´, PE
Screw terminal: 10 mm 3-pin / 1.5 - 1.8 Nm (see Screw Terminals chapter)
2
PE connection: M6/6 Nm
Screw terminal: 35 mm
2
PE connection: M6/6 Nm
Screw terminal: 95 mm
2
PE connection: M6/6 Nm
B [mm] w [mm]
(inches) (inches)
429 (16.88) 50 (1.96)
433 (17.07) 75 (2.95)
1)
1)
1)
a [mm]
(inches)
15 (0.59)
15 (0.59)
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
H [mm] h [mm]
(inches) (inches)
156 (6.14) 31 (1.22)
135 (5.31) 68 (2.67)
Booksize cold-plate power units