DC link components
11.4 Voltage Clamping Module (VCM)
CAUTION
After being transported the screws must be tightened. The tightening torque of the DC link
busbar screws (1.8 Nm, tolerance +30 %) must be checked before commissioning.
CAUTION
The DC link side covers are supplied as standard with the components; they can also be
ordered separately, if required (order no.: 6SL3162-5AA00-0AA0).
244
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4