Table 13-5
Electrical connection at the shield connecting plate for 200 mm component using as an example, internal air
cooling
Unlock and remove the cover of the
terminal block.
Adjust the shock-hazard protection
using a suitable tool.
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
Remove nuts M8 using a suitable tool.
Attach the shock-hazard protection.
13.1 Shield connecting plates
Secure the earthing cable with
screwdriver T25 and the power cable
with torque spanner M8/13 Nm.
Secure the shield clamp to the shield
connecting plate using a suitable tool
Accessories
267