Siemens SINAMICS S120 Equipment Manual page 173

Remove the holder for securing the Control Unit.
If an additional component is to be flush-mounted to the left of the component, the holders
for securing the Control Unit must be removed.
Use suitable tools to lift the latching
device and push up the holder
Booksize cold-plate power units
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
Smart Line Modules (5 kW and 10 kW) with cold plate
7.5 Installing the Cold-Plate Modules on Customer-Specific Heat Sinks
Remove the holder Holder removed
173