Accessories
13.1 Shield connecting plates
13.1.5
Electrical Connection
Table 13-4
Electrical connection at the shield connecting plate for 100 mm component using as an example, internal air
cooling
Attach the protective
conductor (PE) using a
screwdriver T25/3 Nm
266
Secure the power cable with
flat-bladed screwdriver 4/1.8
Nm
Secure the shield clamp to
the shield connecting plate
using a suitable tool
Manual, (GH4), 03.2007, 6SL3097-2AJ00-0BP4
The power cable is
connected.
Booksize cold-plate power units