AppleTalk Network Setup Procedures
To print via an AppleTalk network, it is necessary to perform the following procedures.
1
Macintosh Network Settings
To specify AppleTalk network settings, enable AppleTalk according to the instructions in the documentation provided with your Macintosh.
2
Protocol Settings (See "Protocol Settings," on p . 9-3 .)
Specify the protocol settings. To specify the settings, use:
•
The machine's control panel
•
The Remote UI (via a web browser)
•
Canon utilities
3
Macintosh Print Settings (See e-Manual > Network)
Specify the settings for each computer you use for printing.
•
Depending on the machine you are using, you may have to use optional equipment to print via an AppleTalk network. For the equipment
needed, see "Optional Equipment and System Requirements for Connecting to a Network, " on p. 4-2.
•
It is recommended that the network administrator perform step 2.
•
If you are using the imagePASS or the PS-GX, see the manual provided with the imagePASS or the PS-GX.
•
If you are using the imagePASS or the PS-GX, some functions are not available with this machine. For details, see the manual provided with
9
the imagePASS or the PS-GX.
9-2
AppleTalk Network Setup Procedures