6.1 Overview
This chapter describes how to configure WAN settings from the WAN screens. Use these screens to
configure your P-79X for Internet access.
A WAN (Wide Area Network) connection is an outside connection to another network or the
Internet. It connects your private networks (such as a LAN (Local Area Network) and other
networks, so that a computer in one location can communicate with computers in other locations.
Figure 27 LAN and WAN
LAN
6.1.1 What You Can Do in the WAN Screens
• Use the Internet Access Setup screen
on the P-79X for Internet access.
• Use the More Connections screen
connections.
• Use the WAN Backup Setup screen
helps forward traffic to its destination when the default WAN connection is down.
6.1.2 What You Need to Know About WAN
Encapsulation Method
Encapsulation is used to include data from an upper layer protocol into a lower layer protocol. To set
up a WAN connection to the Internet, you need to use the same encapsulation method used by your
ISP (Internet Service Provider). If your ISP offers a dial-up Internet connection using PPPoE (PPP
over Ethernet), they should also provide a username and password (and service name) for user
authentication.
C
H A PT ER
WAN
(Section 6.2 on page
(Section 6.3 on page
(Section 6.4 on page
P-79X Series User's Guide
45
WAN Setup
46) to configure the WAN settings
53) to set up additional Internet access
57) to set up a backup gateway that
6