Log Message Descriptions; Table 89 System Error Logs; Table 90 System Maintenance Logs - ZyXEL Communications P-2302R-P1 Series User Manual

20.3 Log Message Descriptions

The following tables provide descriptions of example log messages.

Table 89 System Error Logs

LOG MESSAGE
WAN connection is down.
%s exceeds the max.
number of session per
host!

Table 90 System Maintenance Logs

LOG MESSAGE
Time calibration is
successful
Time calibration failed
WAN interface gets IP: %s
DHCP client gets %s
DHCP client IP expired
DHCP server assigns %s
Successful WEB login
WEB login failed
TELNET Login Successfully
TELNET Login Fail
Successful FTP login
FTP login failed
NAT Session Table is Full!
Time initialized by Daytime
Server
Time initialized by Time
server
Time initialized by NTP
server
Connect to Daytime server
fail
Connect to Time server fail
Connect to NTP server fail
Chapter 20 Logs
DESCRIPTION
The WAN connection is down. You cannot access the network
through this interface.
This attempt to create a NAT session exceeds the maximum
number of NAT session table entries allowed to be created per
host.
DESCRIPTION
The device has adjusted its time based on information from
the time server.
The device failed to get information from the time server.
The WAN interface got a new IP address from the DHCP or
PPPoE server.
A DHCP client got a new IP address from the DHCP server.
A DHCP client's IP address has expired.
The DHCP server assigned an IP address to a client.
Someone has logged on to the device's web configurator
interface.
Someone has failed to log on to the device's web configurator
interface.
Someone has logged on to the router via telnet.
Someone has failed to log on to the router via telnet.
Someone has logged on to the device via ftp.
Someone has failed to log on to the device via ftp.
The maximum number of NAT session table entries has been
exceeded and the table is full.
The device got the time and date from the Daytime server.
The device got the time and date from the time server.
The device got the time and date from the NTP server.
The device was not able to connect to the Daytime server.
The device was not able to connect to the Time server.
The device was not able to connect to the NTP server.
P-2302R-P1 Series User's Guide
215