Phone Screens; Analog Phone Screen; Figure 79 Voip > Phone > Analog Phone; Table 65 Voip > Phone > Analog Phone - ZyXEL Communications P-2302HW-P1 Series User Manual

1 When you are on the phone talking to someone, place the flash key to put the caller on
hold and get a dial tone.
2 Dial a phone number directly to make another call.
3 When the second call is answered, press the flash key, wait for the sub-command tone and
press "3" to create a three-way conversation.
4 Hang up the phone to drop the connection.
5 If you want to separate the activated three-way conference into two individual
connections (one is on-line, the other is on hold), press the flash key, wait for the sub-
command tone and press "2".

10.2 Phone Screens

10.2.1 Analog Phone Screen

Use this screen to control which SIP accounts and PSTN line each phone uses. To access this
screen, click VoIP > Phone > Analog Phone.
Figure 79 VoIP > Phone > Analog Phone
Each field is described in the following table.
Table 65 VoIP > Phone > Analog Phone
LABEL
Phone Port
Settings
Outgoing Call Use
SIP1
Chapter 10 Phone
DESCRIPTION
Select the phone port you want to see in this screen. If you change this field, the
screen automatically refreshes.
Select this if you want this phone port to use the SIP1 account when it makes calls.
If you select both SIP accounts, the ZyXEL Device tries to use the SIP account
which was registered last.
P-2302HW/HWL-P1 Series User's Guide
159