Table of Contents
Advertisement
example is shown next to define maximum bandwidth for your networks (A is Guest WLAN and N is home
or company network.)
Figure 26 Example: Bandwidth for Different Networks
N
A
WPS
WiFi Protected Setup (WPS) is an industry standard specification, defined by the WiFi Alliance. WPS
allows you to quickly set up a wireless network with strong security, without having to configure security
settings manually. Depending on the devices in your network, you can either press a button (on the
device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices.
Then, they connect and set up a secure network by themselves. See how to set up a secure wireless
network using WPS in the
7.2 Wireless LAN Screen
Use this screen to configure the SSID and wireless security of the wireless LAN.
Note: If you are configuring the EMG2881-T20A from a computer connected to the wireless
LAN and you change the EMG2881-T20A's SSID, channel or security settings, you will
lose your wireless connection when you press Apply to confirm. You must then change
the wireless settings of your computer to match the EMG2881-T20A's new settings.
Click Configuration > Wireless to open the Wireless screen.
Chapter 7 Wireless LAN
600 kbps
100 kbps
Section 4.2 on page
24.
EMG2881-T20A User's Guide
57
300 kbps
Advertisement
Table of Contents
