Figure 62 Network > Zone > Dmz, Initial; Figure 63 Network > Zone > Dmz, Final; Figure 64 Network > Zone > Wan, Initial - ZyXEL Communications ZyWALL 1050 User Manual

Figure 62 Network > Zone > DMZ, Initial
3 Click the Remove icon for ge4, as shown above. A message box appears, confirming that
you want to remove ge4. Click OK in this message box. The screen is updated, as shown
below.
Figure 63 Network > Zone > DMZ, Final
4 Keep the default value for Block Intra-Zone Traffic, and click OK to save these
changes and return to the previous screen. Click the Edit icon for WAN. The following
screen appears.
Figure 64 Network > Zone > WAN, Initial
5 Click the Popup icon next to ge2, as shown above.
Chapter 6 Tutorials
ZyWALL 1050 User's Guide
129