Cleaning Mode - Dräger Caleo Instructions For Use Manual

Description
*

Cleaning Mode

Cleaning mode is only available if Caleo
humidity control.
®
The Cleaning Mode (Caleo
®
cleaning of Caleo . The Cleaning mode must be used after
®
ending operation of Caleo
supply has been disconnected (see page 98).
Cleaning mode may only be used if Caleo
Cleaning mode is activated on the control panel after pressing
the "Menu" key and selecting the "Cleaning Mode" option.
In Cleaning mode, the water heater is made to run dry. For
this purpose, the humidifier is heated to above 100
all remaining water in the humidifier is evaporated. After the
residual water has been evaporated, the temperature in the
humidifier is maintained for another approx. 10 min at above
o
100 C. Then the humidifier is allowed to cool down.
During or after cleaning mode, condensation may form
under the aggregate housing of the Caleo
When there is no longer any danger of burns for the user,
a message is displayed on the screen to inform the user that
Cleaning Mode is complete and that the incubator can be
dismantled for disinfecting and cleaning (see "After completing
cleaning mode" on page 98).
* optional equipment feature
136
®
is equipped with
™
CleanSwitch ) simplifies the
(see page 79), after the water
®
is empty.
o
C, so that
®
!