Connecting The Base Station - Datalogic QuickScan 21 Series Quick Reference Manual

2. Engage the locking mechanism by pushing up the lever
as far as it will go.
Figure 2. Lever in locked position
it is good practice to put the scanner in the
locked condition at the end of the working shift,
or when not in use for an extended period of
time. This will ensure that the scanner is fully
NOTE
seated for complete battery recharge.

Connecting the Base Station

Figure 3
shows how to connect the Base Station to a termi-
nal, PC or other host device. Turn off the host before connec-
tion and consult the manual for that equipment (if necessary)
before proceeding. Connect the interface cable before apply-
ing power to the Base Station.
The QuickScan QM21X1 reader can also be Pow-
ered by the Terminal. When powered by the Termi-
nal, the battery charger is automatically set as
Slow charge.
NOTE
For some specific interfaces, hosts, or lengths of
cable the use of an external power supply may be
recommended for full recharging capability (see
"Technical Specifications" on page 26
details).
Quick Reference Guide
Connecting the Base Station
for more
3