Industrial 2 Of 5 Set Length 1 - Datalogic QuickScan I QM2131 Product Reference Manual

Symbologies

Industrial 2 of 5 Set Length 1

This feature specifies one of the bar code lengths for
Control on page
Mode, or the first fixed length if in Fixed Length Mode. Length includes the bar
code's data characters only.
The length can be set from 1 to 50 characters, and includes check and data
characters. See
instructions.
Select Industrial 2 of 5 Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
208. Length 1 is the minimum label length if in Variable Length
"Set Length 1"
$CU2L1
01 = Length 1 is 1 Character
DEFAULT
Enter/Exit Programming Mode
on page 304 for more detailed programming
Industrial 2 of 5 Length
~
CANCEL
209