Online Menu: Display Pcs Status And Change Pcs Status; Figure 8-61 Pcs Status Window - Hitachi S10VE User Manual

8.4.3.2 Online menu: Display PCs STATUS and Change PCs STATUS

Use this menu item to display and change the status of the PCs.
(1) From the main menu, select Online and then Display PCs STATUS and Change PCs STATUS.
(2) The PCs Status window appears.
(3) The PCs Status window displays the status of the PCs in a list. To update the status information to the
latest information, click Get Status. To change PCs status, select it from the list and then click
Change Status.
LADDER STATUS
Displays the operating status of ladder logic on the PCs.
Status
RUN
STOP
You can change the RUN/STOP status of the PCs if the LADDER RUN/STOP switch of the CPU
module is set to RUN, and STOP/RUN contact input is OFF on the terminal block. If the LADDER
RUN/STOP switch of the CPU module is set to STOP or STOP/RUN contact input is ON on the
terminal block, clicking the Change Status button has no effect.
The STOP status set by this tool remains in effect until you reset the CPU module or turn it off and
on again.
After you reset the CPU module or turn it off and on again, the PCs operates according to the setting
of the LADDER RUN/STOP switch.

Figure 8-61 PCs Status window

Ladder logic is running.
Ladder logic is stopped.
8-53
Description
8. Tools