Attaching Modules; Figure 6-7 Attaching A Module - Hitachi S10VE User Manual

6.7 Attaching modules

After attaching the mount base to the cabinet, mount the individual modules to the mount base.
Before attaching a module for the first time, remove the connector caps attached to the connectors on the mount
base. When you remove a module from the mount base, reinstate the connector caps to protect the connectors.
Dust and debris can cause malfunction or failure if it enters a connector.
To install the module on the mount base, align it with the module mounting guides (indents in the mount base).
Phillips screwdriver
insertion channel
To tighten the module mounting screws, insert a screwdriver into the Phillips screwdriver insertion channels.
Phillips screwdriver
Module
Mount base

Figure 6-7 Attaching a module

6-7
Module mounting guides
FG
Module
Module mounting screws
(supplied with module)
Tightening torque: 1.0 N-m
6. Installation