Table 8-28 Project List Window (Open) - Hitachi S10VE User Manual

No. Error message
15 Failed to invoke svupdatesiteos command.
16 An error occurred in svupdatesiteos command.
Error: error-code
17 Failed to invoke svsitedel command.
18 An error occurred in svsitedel command.
Error: error-code
19 Site creation right is not provided.
20 Site update right is not provided.
21 Site deletion right is not provided.
22 Failed to update the IP information file for BASE
SYSTEM.
23 Failed to update the IP information file for RPDP.
24 Failed to update rpc_def.e.
No. Error message
1 No project is selected.
2 Close all windows other than the Properties window
and the Project List window, and then execute this
operation.
3 Permission denied to use site.
Table 8-27 Properties window (2/2)

Table 8-28 Project List window (Open)

8-151
Action to take
Check whether the
C:¥windows¥renix¥S10VE¥bin¥svupdatesiteo
s.exe file exists.
If this file does not exist, you will need to install RPDP.
Check the error code in Table 8-55. If the error code is
unknown, contact the system administrator.
Check whether the
C:¥windows¥renix¥S10VE¥bin¥svsitedel.exe
file exists.
If this file does not exist, you will need to install RPDP.
Check the error code in Table 8-56. If the error code is
unknown, contact the system administrator.
Perform the operation as the administrator, or as a user who
has administrator privileges and belongs to the
RPDPusers group.
Perform the operation as the administrator, or as a user who
has administrator privileges and belongs to the
RPDPusers group.
Perform the operation as the administrator, or as a user who
has administrator privileges and belongs to the
RPDPusers group.
Check the state of the C:¥S10VE¥setipa_S10VE.def
file.
Check the state of the
C:¥windows¥renix¥usr¥rpdp_r¥etc¥setipa.d
ef file.
Check the state of the
C:¥S10VE¥xxxx¥xxxx_unit¥xxxxcp¥etc¥gen¥rpc_
def.e file (where xxxx is the PCs number).
Action to take
Select a project and then perform the operation again.
Close all windows except the Properties window and the
Project List window.
Perform the operation as the administrator, or as a user who
belongs to the RPDPusers group.
8. Tools