8.4.6 RAS functions
RAS functions are available from the RAS menu.
The following table lists and describes the RAS functions:
No.
Level 1
1
RAS
Module List
2
Error Log Display
3
4
MCS
5
Display
Performance
6
Event Register
7
Network
Information
8
Ethernet
Communication of
Trace Log
9
10
DHP Information
11
AutoSave
Figure 8-91 Window after clicking the RAS menu
Table 8-8 List of RAS menu items
Category
Level 2
Level 3
--
CP Error log
Display
HP Error log
Display
--
--
--
--
LADDER
Socket Handler
--
--
Displays information about installed modules.
Displays log information for errors that occur on the
PCs.
Displays the MCS window.
MCS (Man-machine Communication System) is a
collective term for the functions that support writing to
and reading from PCs memory.
Displays the sequence cycles and the CP/HP load
ratio.
Displays the ON/OFF state of the event register.
Displays network information.
Displays the Ethernet communication logs for ladder
logic.
Displays the Ethernet communication logs for the
socket handler.
Displays a window in which you can set the DHP
recording mode and view DHP trace information.
Outputs an autosave file and fault analysis information
file.
8-77
Description
8. Tools